N6700 MPS command Action on APS models
OUTPut:COUPle:CHANnel
Couples output channels together.
Does nothing.
OUTPut:PROTection:COUPle
Couples protection on output channels.
Does nothing.
SENSe:CURRent:COMPensate
Sets the output current compensation.
Does nothing.
SENSe:FUNCtion:CURRent
Enables current measurements.
Current measurements are always enabled.
SENSe:FUNCtion:VOLTage
Enables voltage measurements.
Voltage measurements are always enabled.
SENSe:VOLTage:RANGe
Sets the output voltage range.
Does nothing.
SENSe:ELOG:VOLTage:RANGe
Sets the external datalog voltage range.
Does nothing.
[SOURce:]ARB:FUNCtion:SHAPe
Selects an Arb function, or None.
The CDWell Arb function is always selected.
[SOURce:]CURRent:RANGe
Sets the output current range.
Does nothing.
[SOURce:]VOLTage:RANGe
Sets the output voltage range.
Does nothing.
SYSTem:CHANnel[:COUNt]?
Returns the number of output channels.
Always returns a "1".
SYSTem:CHANnel:MODel?
Returns the channel model number.
Returns the power supply model. Same as *IDN?
SYSTem:CHANnel:OPTion?
Returns the channel options.
Returns the power supply options. Same as *OPT?
SYSTem:CHANnel:SERial?
Returns the channel serial number.
Returns the power supply serial number. Same as *IDN?
SYSTem:GROUp:DEFine
Groups up to four output channels.
Does nothing.
SYSTem:GROUp:CATalog?
Returns the number of grouped channels.
Always returns a "1".
SYSTem:GROUp:DELete
Ungroups the specified channels.
Does nothing.
SYSTem:GROUp:DELete:ALL
Ungroups all channels.
Does nothing.
6 SCPI Programming Reference
305 Keysight N6900/N7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
