GPIB Connections 86
USB Connections 86
LAN Connections - site and private 87
Digital Port Connections 88
Rack Mounting 89
Installing the Instrument 89
Black Box Recorder 91
Installing the BBR 91
3 Getting Started 92
Using the Front Panel 93
Turn the Unit On 93
Set the Output Voltage 93
Set the Output Current 94
Set Over-voltage Protection 95
Enable the Output 96
Use Built-in Help System 97
Remote Interface Configuration 98
Introduction 98
USB Configuration 98
GPIB Configuration 98
LAN Configuration 99
Modifying the LAN Settings 100
Using the Web Interface 103
Using Telnet 104
Using Sockets 104
Interface Lockout 104
4 Using the Advanced Power System 105
Programming the Output 106
Set the Output Priority Mode 106
Set the Output Voltage 106
Set the Output Current 107
Set the Slew Rate 107
Set the Output Bandwidth 108
Set the Output Resistance 109
Enable the Output 109
Configure the Output Relays 110
Programming Output Protection 112
Introduction 112
Set the Over-Voltage Protection 113
Set the Over-Current Protection 113
Output Watchdog Timer 114
User-Defined Protection 115
Clear Output Protection Functions 115
Protection Shutdown Behavior 115
Programming Output Transients 117
Output Transients 117
Common Actions for All Transients 117
5 Keysight N6900/N7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
