Programming a Step Transient 120
Programming a List Transient 121
Programming an Arbitrary Waveform 125
Sequencing the Output 127
Turn-On Turn-Off Behavior 127
Turn-On/Turn-Off Delays 128
Enabling/Disabling the Output 128
Sequencing Multiple Units 129
Making Measurements 132
Average Measurements 132
Number of Power Line Cycles (NPLC) 132
Measurement Windowing 133
Seamless Current Measurement Ranging 133
Amp-Hour and Watt-Hour Measurements 134
Temperature Measurements 134
Digitized Measurements 135
Measurement Triggering 137
Using Expression Signal Routing 142
Signal Routing Overview 142
Defining Signal Expressions 143
Configuring Threshold Comparators 145
Specifying Signal Expression Targets 146
Expression Constraints 147
Expression Examples 148
Programming the Digital Port 151
Digital Control Port 151
Bi-Directional Digital I/O 152
Digital Input 153
Expression<1-8> 153
External Trigger I/O 154
Fault Output 154
Inhibit Input 155
Fault/Inhibit System Protection 155
Output Couple Control 156
External Data Logging (Elog) 158
External Data Logging 158
Select the Measurement Function and Range 158
Specify the Integration Period 159
Select the Elog Trigger Source 160
Initiate and Trigger the Elog 160
Periodically Retrieve the Data 161
Terminate the Elog 161
Black Box Data Recording 162
Black Box Recorder 162
Logged Data 163
BBR Status 163
BBR Period 163
BBR Length 163
Keysight N6900/N7900 Series Operating and Service Guide 6
To Next Page
Loading...
Need help?
General
