9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
Oversweep (Meas Uncal) is reported to the Integrity Summary of the Status Questionable register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Questionable Integrity Output Event Query
Returns the decimal value of the sum of the bits in the "Questionable Integrity
Output Condition" on page 1150 register.
NOTE
The register requires that the associated PTRansition or NTRansition filters be
set before a condition register bit can set a bit in the event register. The data in
this register is latched until it is queried. Once queried, the register is cleared.
Remote Command
:STATus:QUEStionable:INTegrity:OUTPut[:EVENt]?
Example
:STAT:QUES:INT:OUTP?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
Questionable Integrity Output Negative Transition
Determines which bits in the "Questionable Integrity Output Condition" on page
1150 register will set the corresponding bit in the "Questionable Integrity Output
Event Query" on page 1151 register when the condition register bit has a negative
transition (1 to 0).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:QUEStionable:INTegrity:OUTPut:NTRansition <integer>
:STATus:QUEStionable:INTegrity:OUTPut:NTRansition?
Example
:STAT:QUES:INT:OUTP:NTR 1
Oversweep cleared is reported to the Integrity Summary of the Status Questionable register
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
1151 IQ Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
