Section 5 AutoCAD Driver
5-10
4) By clicking the “Link” to the KIP Request
Software” checkbox, the user will be asked to
locate the KIP Request configuration file
(this is the file the HDI driver uses to employ
the KIP Request features.)
5) The following dialog box requires the
user to locate the winreq.ini file. Click
on the “location” button.
6) It will point to the default location,
which is C:\Program Files\KIP\Request.
Note
KIP Request must be installed and
configured to link these features to
this HDI driver. Please see the
Request section of the User Guide.
To Next Page
Loading...
