Ch.1 Safety Precautions & Warnings
< 8 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
This is the safety alert symbol and is intended to draw the attention of the user to potential dangers to the user
him/herself or to others that may arise during the use or operation of this system.
These messages must be read thoroughly and strictly observed.
All safety related precautions should be carefully read and fully understood before proceeding with assembly or
usage of this system.
Safety Alert Symbol
Symbols indicating the need for caution (including danger and warnings)
Symbols indicating prohibited acts
Symbols indicating essential acts (compulsory or indicated acts)
Other Symbols
Description of Graphic Symbols
Normal Caution
Danger of Fire
Prohibited
AC Voltage
(Power Supply)
Ground
Danger of
High
Temperature
Danger of
Rotation
Main Power
Supply OFF
Main Power
Supply ON
Power Supply
Standby
Remove the plug
from the power
outlet
Do not touch
Do not disassemble
Do not touch
with wet hand
Mobile
Prohibited
Multi-Leads
Prohibited
Do not expose
to moisture
Danger of
Electrocution
Alert and Symbol Marks
Warning Text (Signal Word)
Signal words indicate the degree of potential hazards in the product.
There are 3 degrees of caution labels, and each is used depending on the level of risk and damage caused by
incorrect use and mishandling.
DANGER
: Failure to observe the caution will produce high risk of serious or fatal injury.
WARNING
: Failure to observe the caution will produce moderate risk of serious or fatal injury.
CAUTION
: Failure to observe the caution will produce moderate risk of serious or fatal injury or dam-
age to property.
NOTE : If the contents of this page are not legible, order a new manual.
To Next Page
Loading...
Need help?
General
