Ch.3 Sequence of Examination
< 52 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Use of print formats allows aligned output on one film either of two versions of the same image each
processed differently or of two different images.
Print Format
Two Images Aligned Horizontally Two Images Aligned Vertically
Primary image Secondary image
Primary image
Secondary image
[1 on 1 Output] (From 1 Image to 2 Frames on 1 Film)
Two versions of the same exposed image may be output on one film.
[2 on 1 Output] (From 2 Images to 2 Frames on 1 Film)
Two different exposed images may be output on one film.
Two Images Aligned Horizontally Two Images Aligned Vertically
First Image Second Image
First Image
Second Image
If this print format is fre-
quently used, register
the settings in advance
in parameter keys on
the user tool so that
you can skip the setting
procedure that has to
be carried out each
time the image is read.
Primary/Secondary
Image
When the image is out-
put by "1 on 1 Output",
the image on the left or
at the top is referred to
as the "Primary Image";
while the one at the
right or the bottom is
referred to as the
"Secondary Image."
(AA)
( )
A
A
(AB)
( )
A
B
For one image to two frames, a stamp will be positioned at one location. For two
images to two frames, a stamp will be positioned for each frame.
Refer to the page for “Detailed Setup” screen (Overlay).
[2 on 1 Output] (Mammography)
Two different exposed images may be output on one film.
Two Images Aligned Horizontally (AB)
First Image Second Image
Mammo Use is not approved in the United States of America.