Konica Minolta CS-3 User Manual

Ch.3 Sequence of Examination
< 36 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Once orders have been registered using the examination body part/parameter selection screen, examination may be
initiated immediately; after registration of the examination body part/parameters additional patient data may be input or
searched using CS-3, it is also possible to simply make a reservation on the examination list.
Reserving Patient Data
1 Input patient data on the examination search
screen.
2 Touch the [Perform] button.
• The examination body part/parameter selection
screen will be displayed.
3 Select exposure parameters and register the
order.
4 Touch the [Schedule] button.
• The exposure parameters will be registered in
patient data input in step 1 and the display
returned to the initial screen.
• The number displayed in the [items] column will be
increment by “1” each time a reservation is added.
p.31, 32
Patient Data Input
(Input from CS-3)
(Search from Data
Base)
p.34 Examination
Body Part/
Parameter
Selection
After reserving patient
data on the examina-
tion list and returning to
the examination search
screen,
the next patient data
may be input. To check
patient data reserved
on the examination list,
touch the [Exam. List]
button on the examina-
tion search screen.
The procedure for doing exam using an upright position reader with the examination search screen in Single-Image
format is described below.
Exposure [Single-Image Format/Upright Position Reader]
1 Touch the order to be read on the examination
check screen.
• The selected order will be shown in a green frame.
• Parameters corresponding to exposure parameters
and reader status will be displayed in the image
display field.
2 Ensure that "Ready" is displayed in the reader
status window.
• If "Erasing" is displayed, wait until erasure has
been completed and the display changes to
"Ready".
Reader Status
Exposure Parameter
p.81 Examination
Check
Screen
[Single-Image
Screen]
If the reader device is
upright position reader,
the patient name and
patient ID will be dis-
played in the reader
display panel.
Check with the patient
to ensure that the cor-
rect name is displayed.
2
4

Konica Minolta CS-3 Specifications

General

Brand	Konica Minolta
Model	CS-3
Category	Medical Equipment
Language	English