Examination Body
Part/Parameter
Selection Screen
Examination
List
Screen
Examination
Search
Screen
or
Ch.3 Sequence of Examination
< 33 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
In systems where examination data is sent from ID-680 Series or Radiology Information System (RIS), the examina-
tion list screen is usually set as the initial screen.
Patient data sent from ID-680 Series or Radiology Information System (RIS) is displayed on the examination list
screen in the order in which it is registered.
Checking Patient Data
1 Make selection by touching the patient data to
be examined.
• The selected data will be displayed in blue charac-
ters in a green frame.
Following this screen:
• Initialization of Examination
• Deletion of patient data
➔Select the patient data to be deleted
from the list and touch the [Delete] but-
ton.
• Modification of patient data
➔Select the patient data to be modified
from the list and touch the [Modify] but-
ton.
• Input of new patient data
➔Touch the [New/Search] button
• Search and input of patient data
➔Touch the [New/Search] button
p.33 Initialization
of
Examination
p.95 Patient Data
Amendment
Screen
p.92 Patient Data
Input/Search
Screen
(When the
examination
list screen
has been set
as the initial
screen)
In systems where
patient information is
retrieved from higher
devices, touch the "list
update" button to
update the list if the
patient information to
be retrieved is not dis-
played.
Touch the [Perform] button on the examination search or examination list screen.
Initialization of Examination
When patient data is input using the examination search screen or when examination data
sent from ID-680 Series or Radiology Information System (RIS) does not include order,
the examination body part/parameter selection screen is displayed.
Following this screen:
• Examination Body Part/ Parameter Selection
p.34 Examination
Body Part/
Parameter
Selection
When order is not registered
1
To Next Page
Loading...
Need help?
General
