Ch.4 Description of Screens
< 90 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
The screen displays a list of patient data reserved for examination by CS-3 or ID-680 Series or Radiology
Information System (RIS).
The patient data required for examination may be selected from the patient data list.
• New patient data reserved.
• Patient data already reserved may be modified or deleted.
• Based on parameters (Hospital department, Location(Ward), Exam. Room) input into patient data, specific patient
data can be extracted and list displayed.
Examination List Screen
(When the examination list screen has been set as the initial screen)
List Display of Patient Data
Reserved patient data and exposure parameters and
count added to patient data are displayed.
Patient data used for examination may be selected
here.
Touching any line of patient data will result in selection
of that data and display of the data in a green frame in
blue characters.
Patient data for which examination has been restarted
and suspended on the examination check screen is
displayed as "
*
"
•8 reserved patient data are displayed on one screen.
Where there are more than 9 reserved data, the scroll but-
ton may be used to scroll down the list.
• Touching the title of an item of patient data allows that
item name to be used as a key for patient data sorting.
One touch results in display in ascending order, one more
touch in descending order.
• The suspended patient data is displayed in a purple color.
Filter, Schedule, Pending Display
Display of parameters extracted from the patient data
list, reservation count and count of examinations in
hold status.
p.28 Before
Examination
In cases of patients for
whom there is input in
patient data items dis-
played in yellow (selec-
tion of data "Possibility"
or "Pregnancy" under
"pregnancy"),
an exclamation mark (!)
is displayed in the left
corner of the patient data
list and on the patient
data amendment screen.
or
To Next Page
Loading...
Need help?
General
