Ch.4 Description of Screens
< 99 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Parameter Button
The examination target set by selection using the body
part buttons and parameters for each examination tar-
get are displayed in button format.
Selection of one parameter button for the examination
required will result in addition of a new order to the
order list.
Order List Display
A list of parameters registered in the order is displayed.
Touching a parameter button will result in registration of
that condition in the order and display on the order list.
Exposure parameters
may be registered in
one patient data up to a
maximum of 32 orders.
Scroll Buttons [ ]
Used to scroll the parameter button display when there
are 6 or more parameter buttons in the general catego-
ry.
Touch the order to be
changed on the order list.
(The order will be displayed
in a green frame.)
Select the new parame-
ter button to be set.
Completion of
change.
To change parameters registered in an order
Scroll Buttons [ ]
Used to scroll the order list 8 orders at a time when 9 or
more orders are registered.
To Next Page
Loading...
Need help?
General
