Ch.1 Safety Precautions & Warnings
< 11 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Cautions Relating to Handling Single Bar Code Reader
The single bar code reader (option) conforms to the CDRH Class II Laser Products. Be sure to follow the description
below when handling the bar code reader.
The caution label illustrated below is stuck on the bar code reader.
● The laser beams will be radiated from the window on the front of the reader. Never look at the laser
beam directly; this may cause serious damage to the eyes.
● Do not direct the laser beam to the eyes; this may cause serious damage to the eyes.
● The laser beams may be radiated while disassembling. Do not disassemble the bar code reader.
● Be careful to ensure that the reading window does not become cracked or scratched. Any cracks or
scratches may result in lowered levels of performance or malfunction.
CAUTION
NOTE : If the contents of this page are not legible, order a new manual.
Safety Acquisition Standard
Back Side
Left Side
Item Specification
Laser Safety Standard Conforms to CDRH Class 2
Conforms to IEC Class 2
Electricity Safety Regulations Conforms to UL, CSA, CE (EMC), CTICK, GS
Conforms to VCCI Class B
Conforms to FCC Part15 Class B
Scan Window
Upper Side
To Next Page
Loading...
Need help?
General
