Ch.1 Safety Precautions & Warnings
< 15 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Cautions Relating to Handling Multi Bar Code Reader
The Multi bar code reader (option) conforms to the CDRH Class II a Laser Products. Be sure to follow the description below
when handling the bar code reader.
● The laser beams will be radiated from the window on the front of the reader. Never look at the laser
beam directly; this may cause serious damage to the eyes.
● Do not direct the laser beam to the eyes; this may cause serious damage to the eyes.
● The laser beams may be radiated while disassembling. Do not disassemble the bar code reader.
● Be careful to ensure that the reading window does not become cracked or scratched. Any cracks or
scratches may result in lowered levels of performance or malfunction.
Located on the underside
CAUTION
NOTE : If the contents of this page are not legible, order a new manual.
Safety Acquisition Standard
Item Specification
Laser Safety Standard Conforms to CDRH Class 2a
Conforms to IEC Class 1
Electricity Safety Regulations Conforms to UL, CSA, VDE, EC
EMC Safety Regulations Conforms to FCC Class A, CISPR Class B, EC
To Next Page
Loading...
Need help?
General
