Reference • Backing Sequence mode
92
Duration
[001…100%]
This specifies the duration of the note, relative to the
length of the step.
100 Duration of the step.
Lower values Staccato (sharply detached) notes.
Higher values Legato (smooth flowing) notes.
Step recording the extra tracks
In order to step record an extra track, go to Page 2 of
the Backing Sequence mode, select the extra track
(ETr1-ETr8), press REC/WRITE/LYRICS and then
START/STOP. This page will appear.
The extra track recording pages are the same as the
keyboard track recording page.
Page 3: Erase Backing Sequence
This function erases all the data from the selected
backing sequence.
Select the backing sequence you wish to erase using
the TEMPO/VALUE buttons. Press ENTER/YES
twice to erase it.
Page 4: Copy Backing Sequence
This function copies the entire contents of the selected
backing sequence to another backing sequence.
Select the target backing sequence using the TEMPO/
VALUE buttons, and press ENTER/YES twice.
Note
Position
Metro
Step
Velocity
Duration
Measure
Backing Sequence to be erased
Source (the selected backing
sequence)
Target
To Next Page
Loading...
Need help?
General
