EasyManuals Logo

Korg i40M User Manual

Korg i40M
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Reference Backing Sequence mode
82
Page 1: Recording
The backing sequence can be recorded in different
ways:
In real time, all the tracks in one go (see “Recording
all the tracks in one go in real time” on page 82).
In real time, a track at a time (see “Recording a
track at a time in real time” on page 85).
In step mode (see “Page 2: Step recording” on
page 89).
While you are at Page 1 of the Backing Sequence
mode, press REC/WRITE/LYRICS to enter the record-
ing mode. In order to go back to the playback mode,
press REC/WRITE/LYRICS or EXIT/NO.
Recording all the tracks in one
go in real time
This mode allows you to create a new song by record-
ing the playback in real time with the arrangements.
You only need to put the backing sequence in the
recording mode, start playing with the arrangements
and the new song is ready.
For instructions on this recording mode see on
page 32.
1 If the i40M is connected to a MIDI accordion, go
to the Disk/Global mode and select the MIDI
Setup Accordion 1.
See “Connecting the i40M to a MIDI accordion” on
page 49. “Accordion 1” allows you to transmit the
right hand over the special Global channel and the
chords over the Chord 1 and Chord 2 channels.
Note: For this recording mode, the backing sequence
must receive over the special Global, Chord 1 and
Chord 2 channels.
2 If the i40M is connected to a keyboard or to
another controller, program it to transmit over
the special Global channel.
3 Press B.SEQ to enter the Backing Sequence
mode.
4 If necessary, press EXIT/NO to get to Page 1.
5 Press REC/WRITE/LYRICS to activate the record-
ing.
The Backing Sequence-Realtime Recording page
will appear (see below), where you can select the
track you wish to record, choose the quantize in
recording and program the metronome.
6 Program the parameters.
7 Press START/STOP (or INTRO/ENDING +
START/STOP) to start the recording.
8 Play freely, using any control button of the
arrangement.
9 Press START/STOP (or INTRO/ENDING) to stop
the arrangement.
0 Press START/STOP to stop the recording.
Details of the Backing Sequence-Real-
time Recording page
Tempo
Tempo mode
Chord name

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg i40M and is the answer not in the manual?

Korg i40M Specifications

General IconGeneral
BrandKorg
Modeli40M
CategoryMusic Equipment
LanguageEnglish

Related product manuals