Reference • Disk/Global mode
140
Page 7: MIDI channel settings (3)
The third page dedicated to the programming of
arrangement MIDI channels.
CHORD 1
[--, 01-16]
Used for receiving chords from an external device
(master keyboard, sequencer, MIDI accordion). The
notes received on this channel are redirected to the
chord recognition engine, and mixed with the notes
received on the Global and Chord 2 channels.
When using a MIDI accordion it would be better to
assign it to MIDI channel 3, this being the channel that
is usually dedicated to the chords part. If you use a
master keyboard to simulate an integrated keyboard
in the i40M, choose the same channel that is assigned
to Global.
To deactivate this parameter choose the “--” option.
CHORD 2
[--, 01-16]
Used for the receiving of chords from an external
device (particularly a MIDI accordion or pedal con-
trols). The notes received on this channel are redi-
rected to the chord recognition engine, and mixed with
the notes received on the Global and Chord 1 chan-
nels. When using a MIDI accordion, it would be better
to assign it to MIDI 2, this being the channel that is
usually dedicated to the bass part.
To deactivate this parameter choose the “--” option.
KBSET (Keyboard Set)
[--, 01-16]
Used for receiving program change messages for the
selection of Keyboard Sets. To deactivate this parame-
ter choose the “--” option.
ARNG (Arrangement)
[--, 01-16]
Used for receiving program change messages for the
selection of arrangements. To deactivate this parame-
ter choose the “--” option.
CHORD1=03 CHORD2=04
KBSET=01 ARRANG=01
Chords 2
Keyboard Set
Arrangement
Chords 1
To Next Page
Loading...
Need help?
General
