Reference • Song Edit mode
121
Page 7: Edit
In this page, you can select one of the three following
functions: delete measures (DELETE), insert measures
(INSERT), erase data from measure (ERASE). Move
the cursor to the desired function using the CURSOR
buttons, then press ENTER/YES to enter the subpage.
7-1. Delete measures
This function deletes measures from the selected track.
The following measures will then be moved back, fill-
ing the gap that was created by deleting the other data.
1. Move the cursor to the “Track” field using the
CURSOR buttons, and choose the track with the
TEMPO/VALUE buttons. Select ALL to delete the
measures from all tracks at the same time.
2. Move the cursor to the “First measure” field, and
choose the first of the measures you wish to delete.
Move the cursor to the “Last measure”, and choose
the last of the measures you wish to delete If you
only wish to delete one measure, assign the same
measure to both the fields.
3. Press ENTER/YES twice to confirm deletion.
7-2. Insert measures
This function inserts measures into the selected track.
The following measures will be moved forward.
1. Move the cursor to the “Track” field using the
CURSOR buttons, and choose the track with the
TEMPO/VALUE buttons. Select ALL to insert mea-
sures on all tracks at the same time.
2. Move the cursor to the “First measure” field, and
indicate the measure where you wish the insert to
take place. Move the cursor to the “Number of
measures” field, and indicate the number of mea-
sures to be inserted. Move the cursor to the “Time
signature” field, and choose the time signature for
the measures you wish to insert.
3. Press ENTER/YES twice to confirm insertion.
Inserting measures with a different time
signature
The change of time signature during playback will
take place if the tempo is =AUT. If measures are
inserted with a different time signature in a track, all
the tracks will have the new time signature. The data
will remain intact however, and the tracks will play
exactly as they did before.
Inserting two measures of time signature = 7/8
If you assign the value **/** to the “Time signature”
parameter, the new measures will have the same time
signature as the measures that are in the same position
on the other tracks. If the other tracks are still empty,
the time signature of the measure that precedes the
measures to be inserted, will be selected.
DELETE
INSERT
ERASE
Track
First measure
Last measure
Time signature
Track
First measure
Number of measures
1 (4/4) 2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4)
1 (4/4) 2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4)
1 (4/4)
1 (4/4) 2 (7/8) 3 (7/8) 4 (4/4) 5 (3/4)
2 (7/8) 3 (7/8) 4 (4/4) 5 (3/4) 6 (3/4) 7 (3/4)
Insert
Tr01
Tr02
Tr02
Tr01
To Next Page
Loading...
Need help?
General
