Korg i40M User Manual

Reference • Disk/Global mode
131
STY (STYLE USER)
This option allows you to load a style from a style file.
There are 16 USER style locations available (U11-U28).
1. With the TEMPO/VALUE buttons choose the file
from which you wish to load the style.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons to
choose the style you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons to
choose the location where you wish to load the
style.
4. Press ENTER/YES to load the style. (Or press
EXIT/NO to cancel the operation).
1-3. Load global
The Load Global function allows you to load a Global
file, containing most of the settings of this operative
mode. By loading the Global data, the scale, pedal set-
tings, control settings and MIDI channel settings may
be automatically modified. The Global contains also
the four USER scales and the two USER drum kits.
1. Using the TEMPO/VALUE buttons choose the Glo-
bal file you wish to load.
2. Press ENTER/YES to load the file. (Or press EXIT/
NO to cancel the operation).
1-4. Load keyboard set
The Load All Keyboard Set function allows to load the
Keyboard Sets. Any Keyboard Sets already in memory
will be deleted.
If you are loading data from a Korg iS40 disk, an error
message (“Missing HMB file”) will appear at the end
of the loading procedure, because the Vocal/Guitar
setup file is missing in the Korg iS40. The loaded data
will work properly, although the setup data of the
Vocal/Guitar section is missing.
1. Select the Keyboard Set file you wish to load, using
the TEMPO/VALUE.
2. Press ENTER/YES to load the file. (Or press EXIT/
NO to cancel the operation).
2. Save
The Save function allows you to save data on disk. It is
not possible to save single elements in a file; All the
data of a certain type previously existing in memory,
will always be saved in a file
1. Choose a file type and press ENTER/YES to give it
a name.
2. Use the CURSOR buttons to move the cursor to the
character to be changed. Choose a character with
the TEMPO/VALUE buttons. Press INS to insert a
character at the cursor location, DEL to delete the
character at the cursor location. The name can be
up to 8 characters long (capital letters and num-
bers).
3. Press ENTER/YES to save the file on disk. If a file
with the same name already exists on disk, a mes-
Source file Style to be
loaded
Target location
Source file
Source file
Save (ALL)(KBSET)
(ARR)(PRG)(BSQ)(GLB)
All arrange-
ments
All programs The GlobalAll backing
sequences
All data
All Keyboard Sets

Korg i40M Specifications

General

Brand	Korg
Model	i40M
Category	Music Equipment
Language	English