Getting Started • Tutorial
40
8 Start singing and adjust the effect level (param-
eter B) with the A/B knob.
9 Press the C button to mute the entire VOCAL/
GUITAR section.
0 Press the C button again to cancel the mute.
Changing the settings of the
Vocal/Guitar section
The Keyboard Sets contain the settings of the
VOCAL/GUITAR section. Select a Keyboard Set to
automatically change the settings. The default settings
of the Keyboard Sets supplied with the instrument are:
As the Keyboard Sets are modifiable, you can edit and
save the settings of the section. You only need to make
the modifications as described in the following para-
graph and save the Keyboard Set as described on a
page 31.
Programming the Vocal/Guitar
section
1 If necessary, press ARR.PLAY to go to the
Arrangement Play mode.
2 Select a Keyboard Set to activate the VOCAL/
GUITAR section.
When you turn the instrument on, the VOCAL/
GUITAR section is deactivated. You need to select a
Keyboard Set to activate it.
3 Press PAGE [+] repeatedly to get to “Page 14:
Vocal/Guitar mode/ Assigned parameters”.
4 According to the connected device, assign the
Guitar (for the guitar) or the Vocal (for the
microphone) option to the “VOC/GTR MODE”
parameter.
Note: Each mode offers effects that are especially
dedicated to the guitar or vocal. For example, the har-
monizer is only available in the Vocal mode, while the
amplifier simulator only works in the Guitar mode.
Other effect with the same name, such as the com-
pressor, work differently in each mode.
5 Go to the next pages to select the effects.
You can have different effects according to the
selected mode (Vocal or Guitar). Now it is impor-
tant to select the effects, to assign the control of two
of their parameters to the A/B knob, and the mute
to the C button.
6 Go back to “Page 14: Vocal/Guitar mode/
Assigned parameters”. Move the cursor to “A”
to select the parameter assigned to the A/B
knob. Select the parameter you wish to control
with the A/B knob in A mode.
7 Press CURSOR [<] to select the “A” parameter.
Press TEMPO/VALUE [+] to change the “A”
parameter to “B”.
8 Press CURSOR [>] to select the parameter
assigned to the A/B knob. Select the parameter
Bank Type of settings
A Vocal
B Guitar clean
C Guitar distorted
MODE
ARR.PLAY
OCTAVETEMPO
PAGE
CHORD
VOC/GTR MODE=Guitar
A:CHORUS Depth
M
7
MODE
ARR.PLAY
OCTAVETEMPO
PAGE
CHORD
VOC/GTR MODE=Guitar
A:CHORUS Depth
M
7
MODE
ARR.PLAY
OCTAVETEMPO
PAGE
CHORD
VOC/GTR MODE=Guitar
B:DIST Depth
M
7
To Next Page
Loading...
Need help?
General
