Reference • Disk/Global mode
148
Page 16: Auto chord scanning/Damper polarity
In this page, you can program the Automatic-Chord
Scanning and the Damper pedal polarity.
Auto chord scanning
[ON, OFF]
If this parameter is set on ON, the Chord Scanning
changes automatically when you select a Keyboard
Mode.
Damper polarity
[REVERSE (+), KORG (–)]
It is possible to connect a footswitch to the DAMPER
connector to activate the Damper or Sustain function
and produce a similar effect of a right-most pedal on
an acoustic piano. The pedals that are readily available
on the market, can have different polarities. If you
own a Korg PS-2 pedal, you should program its right
jack as KORG (–) and the left jack as REVERSE (+).
KORG(–) For pedals with normally open polar-
ity. Choose this option to connect the
Korg DS-1 and PS-1 footswitches.
REVERSE(+) For pedals with normally closed
polarity. Choose this option to con-
nect the Korg DS-2 footswitch.
Keyboard Mode
Automatically selected Chord
Scanning
FULL UPPER FULL
Auto chord scanning
Damper polarity
SPLIT LOWER
MANUAL DRUM --
Keyboard Mode
Automatically selected Chord
Scanning
To Next Page
Loading...
Need help?
General
