Reference • Program mode
173
Page 17: Effect select
The instrument has two incorporated digital effect
processors. In this page, you can choose which effects
you wish to assign to the program and turn them on or
off. For more details, see “Effects” chapter.
Page 18: Effect modulation
In this page you can connect the effects to controls,
which allow you to dynamically modulate their inten-
sity. For more details, see “Effects” chapter.
Page 19: Effect placement
In this page you can choose the effect setup of the pro-
gram, and program pan and levels for channels C and
D. For more details, see “Effects” chapter.
Page 20: Effect 1 settings
Page 21: Effect 2 settings
These pages contain the effect parameters selected on
“Page 17: Effect select”, that will be used for the
selected program. The parameters contained in these
pages will depend on the effects you have selected. For
more information on programming effects, see
“Effects” chapter.
To Next Page
Loading...
Need help?
General
