Reference • Disk/Global mode
141
Page 8: MIDI filter
This page contains a series of MIDI filters, to be used
to restrict transmission and reception of some kinds of
MIDI events. For example, events like aftertouch use
up a great deal of memory and make the songs too
large, therefore you can choose to “filter” them whilst
recording.
Note: The data that has already been recorded in a
backing sequence or an accompaniment track of the
arrangement, will always be transmitted (whatever the
status of this parameter is).
PR (Program change)
[x, o, n, s]
Program change and bank select message filter.
o Messages will be transmitted and
received normally.
x Messages will be neither transmit-
ted, nor received.
n Program change messages will be
transmitted, but the bank select mes-
sages will not.
s Program change messages will be
transmitted and received. Program
banks A and B will be transmitted as
[MSB 0, LSB 0], and the DRUM bank
will be transmitted as [MSB 0, LSB 0].
The other banks will be transmitted
normally.
AF (Aftertouch)
[x, o]
Aftertouch message filter.
o Aftertouch messages will be transmit-
ted and received normally.
x Messages will be neither transmit-
ted, nor received.
FCT (Control change)
[x, o]
Control change message filter.
o Control change messages will be
transmitted and received normally.
x Messages will be neither transmit-
ted, nor received.
EX (System Exclusive)
[x, o]
System Exclusive message filter, used to transfer pro-
gramming data via MIDI, for example programs,
arrangements, styles, and editing commands for the
Arrangement Play and Backing Sequence modes.
o System exclusive messages will be
transmitted and received normally.
x Messages will be neither transmit-
ted, nor received.
Program change
Aftertouch
Control change
System Exclusive
To Next Page
Loading...
Need help?
General
