Reference • Song Edit mode
122
Time signature = **/**
7-3. Erase measures
This function erases all or part of the data contained in
the specified measure(s). The measures themselves
will not be erased.
1. Move the cursor to the “Track” field using the
CURSOR buttons, and choose the track with the
TEMPO/VALUE buttons. Choose ALL to erase
data from all the tracks at the same time.
2. Move the cursor the “First measure” field, and
choose the first of the measures you wish to erase.
Move the cursor to the “Last measure” field, and
choose the last of the measures you wish to erase. If
you only want to erase data from one measure,
assign the same measure to both the fields.
3. Press ENTER/YES twice to confirm erasure of data.
Erasing control change messages
The continuous controls (control change, CTRL) can be
made up of an activating and a deactivating part. If
you erase the deactivating part, the control can get
“stuck”. For example, if you erase the deactivating
message of the damper, the pedal will stay open; if you
erase the pitch bend reset message, the track could be
out of tune. Manually erase the activating messages or
insert new deactivating events with the functions of
“Page 4. Event edit”.
1 (4/4) 2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4)
1 (4/4) 2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4)
1 (4/4)
1 (4/4) 2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4)
2 (2/4) 3 (2/4) 4 (4/4) 5 (3/4) 6 (3/4) 7 (3/4)
Insert
Tr01
Tr02
Tr02
Tr01
Track
First measure
Data type
Last measure
Type of data Erased data
ALL All data
NOTE All note messages
CTRL All control change messages
AFTT Channel/polyphonic aftertouch messages
BEND All pitch bend messages
PROG All program change messages
To Next Page
Loading...
Need help?
General
