Reference • Backing Sequence mode
104
Page 16: Next Backing Sequence
The “Next Backing Sequence” page allows you to
choose a backing sequence which will be automati-
cally selected when the current backing sequence
ends.
Next backing sequence
[OFF, BSEQ0…BSEQ9]
This indicates the backing sequence that will be
selected when the current backing sequence ends. If it
is OFF, at the end the current backing sequence will
carry on playing.
Play/Stop
[STOP, PLAY]
This will set the backing sequence you have selected as
the next one, in Play or Stop. If all the backing
sequences in memory are in Play, they will link up
with the next backing sequence, and backing sequence
9 will link up with backing sequence 0, thus you can
create a “loop” of backing sequences that playback
continuously until you press START/STOP.
STOP The next backing sequence will be
selected, but not played back.
PLAY The next backing sequence will be
selected and played back.
Next backing sequence
Play/Stop