Getting Started • Operative modes
19
Subpages
Some of the display pages allow you to select second-
ary pages, referred to as “subpages”. The subpages are
indicated by two round brackets ( ) which contain the
option. In the display shown below, the (LOAD),
(SAVE) and (UTIL) items access the relative subpages.
Use the CURSOR buttons to place the cursor on the
name of the desired page and press the ENTER/YES
button to access the selected subpage. To return from a
subpage to the higher page press the EXIT/NO but-
ton.
Programming a parameter
value
In order to modify the value of a parameter that
appears on the display, first of all you need to select
the value with the cursor. The cursor is indicated by
the flashing of the value or the text line selected. Move
the cursor in the display with the CURSOR buttons
and modify the value with the TEMPO/VALUE. but-
tons.
MODE
DISK/GLOBAL
PAGE
VALUE
Cursor
To Next Page
Loading...
Need help?
General
