Korg i40M User Manual

Reference • Song Play mode
110
Page 3: Transpose position
In this page you can specify the transpose position in
the MIDI data flow.
Transpose position
[MIDI/INT, SEQ/MIDI&INT, MIDI&SEQ/INT]
This parameter determines in which point of the MIDI
data flow the action of the TRANSPOSE buttons is
inserted. The parameter only regards the Song Play
mode. The OCTAVE buttons always apply only to the
keyboard sounds, and are not affected by this setting.
With the MIDI/INT option, only the notes received by
the MIDI IN will be transposed. The notes played by
the sequencer will not be transposed.
With the SEQ/MIDI&INT option, both the notes
received via MIDI and the ones played by the
sequencer will be transposed. Both the notes sent to
the internal tone generator and the ones sent to the
MIDI OUT will be transposed.
With the MIDI&SEQ/INT option, the notes received
via MIDI and the ones played back from the sequencer
will be transposed. Only the notes sent to the internal
tone generator (and not the ones sent to the MIDI
OUT) will be transposed.
TRANSPOSE POSITION
MIDI/INT
Scale
Tone
generator
MIDI OUT
MIDI IN
Transpose
Song Play
sequencer
GLOBAL
MIDI OUT
MIDI IN
Scale
Tone
generator
Transpose
Song Play
sequencer
GLOBAL
MIDI OUT
MIDI IN
Scale
Tone
generator
Transpose
Song Play
sequencer
GLOBAL

Korg i40M Specifications

General

Brand	Korg
Model	i40M
Category	Music Equipment
Language	English