Korg i40M User Manual

Reference • Disk/Global mode
130
ARR (ARRANGEMENT)
This option allows you to load an arrangement from
an arrangement file. If the arrangement uses an USER
style, this style will not be loaded with this command.
To load the missing style, use the Load One Style func-
tion.
1. Use the TEMPO/VALUE buttons to choose the
program file from which you wish to load the pro-
gram.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons to
choose the program you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons to
choose the USER location where you wish to load
the program. Alternatively, you can choose the
location with the buttons in the PROGRAM sec-
tion.
4. Press ENTER/YES to load the program. (Or press
ENTER/NO to stop loading).
PRG (PROGRAM)
This option allows you to load a program from a pro-
gram file. If you load a USER Drum program, the rela-
tive USER drum kit will be loaded as well.
1. Use the TEMPO/VALUE buttons to choose the
program file from which you wish to load the pro-
gram.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons to
choose the program you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons to
choose the F(USER) or the Dr 27-28 location, where
you wish to load the program. Alternatively, you
can choose the location with the buttons in the
PROGRAM section.
4. Press ENTER/YES to load the program. (Or press
EXIT/NO to stop loading).
Warning: If the loaded program uses a USER drum kit,
that drum kit will automatically be loaded. In this case,
any previously existing drum kit in memory will be a
overwritten by the new drum kit.
BSQ (BACKING SEQUENCE)
This option allows you to load a backing sequence
from a backing sequence file.
1. With the TEMPO/VALUE buttons choose the back-
ing sequence file from which you wish to load the
backing sequence.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons to
choose the backing sequence you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons to
choose the location where you wish to load the
backing sequence.
4. Press ENTER/YES to load the backing sequence.
(Or press EXIT/NO to cancel the operation).
Source file Arrangement to
be loaded
Target location
Source file Program to be
loaded
Target location
Source file BS to be loaded Target location

Korg i40M Specifications

General

Brand	Korg
Model	i40M
Category	Music Equipment
Language	English