Kostal INVEOR Drive Controller - Page 88

Parameters
88 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
4.192 Relay 1 off Unit:
Relationship
to parameter:
4.190
Parameter
manual:
P. xy
Transfer status:
2
min:
- 32767 Own value
(to be entered!)
max: 32767
def.: 0
If the set process variable exceeds the switch-off limit, the output is again set
to 0.
4.193 Relay1 on delay Unit: s
Relationship
to parameter:
4.194
Parameter
manual:
P. xy
Transfer status:
2
min.:
0 Own value
(to be entered!)
max.: 10000
def.: 0
Specifies the length of the switch-on delay.
4.194 Relay1 off delay Unit:
Relationship
to parameter:
4.193 / 4.213
Parameter
manual:
P. xy
Transfer status:
2
min.:
0 Own value
(to be entered!)
max.: 10000
def.: 0
Specifies the length of the switch-off delay.