8-38
Setup and Registration (System Menu) > System Menu
Sending Job - Folder
[System Menu/Counter] key > [Function Settings] > [Sending Job - Folder]
Fax/iFax
[System Menu/Counter] key > [Function Settings] > [Fax/iFax]
Configure settings for FAX.
FAX Operation Guide
WSD
[System Menu/Counter] key > [Function Settings] > [WSD]
DSM Scan
[System Menu/Counter] key > [Function Settings] > [DSM Scan]
Item Description
FTP Settings Select whether to send documents using FTP. To use the FTP Client, set the protocol to
[On] for "Protocol Settings". The default port number is 21.
Value: Off, On, 1 to 65535 (Port Number)
SMB Settings Select whether to send documents using SMB. To use the SMB Client, set the protocol to
[On] for "Protocol Settings". The default port number is 445.
Value: Off, On, 1 to 65535 (Port Number)
Item Description
WSD Scan Protocol
Settings
Select whether to use WSD Scan.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or network.
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
WSD Print Protocol
Settings
Set whether to use our proprietary web services. WIA driver, TWAIN driver and
Network FAX driver use this Enhanced WSD web service.
*1
Value: Off, On
Available
Network
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Item Description
Basic Using DSM Select whether to use DSM scan.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or network.
LDAP Select whether to use LDAP.
Value: Off, On
To Next Page
Loading...
