Kyocera 408ci - Page 560

10-41
Troubleshooting > Troubleshooting
I
J
K
Message Checkpoints Corrective Actions
Reference
Page
Incorrect account
ID.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-23)
— The account ID was incorrect
when processing the job
externally. The job is canceled.
Select [End].
—
Incorrect box
password.
— The box password was incorrect
when processing the job
externally. The job is canceled.
Select [End].
—
Incorrect Login User
Name or Password.
*1
— The login user name or
password was incorrect when
processing the job externally.
The job is canceled. Select
[End].
—
Install the punch
waste box.
— Follow the instructions on the
screen. and install the punch
waste box.
page 10-19
Install the waste toner
box.
— The waste toner box is not
installed correctly. Set it
correctly.
page 10-7
Message Checkpoints Corrective Actions
Reference
Page
Job Accounting
restriction
exceeded.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-23)
Is the acceptable printing count
restricted by Job Accounting
exceeded?
The printing count exceeded the
acceptable count restricted by
Job Accounting. Cannot print
any more. The job is canceled.
Select [End].
—
Job separator tray is
full of paper.
Is the acceptable storage
capacity exceeded?
Remove the paper. Printing then
resumes.
—
Message Checkpoints Corrective Actions
Reference
Page
KPDL error.
*1
― PostScript error has occurred.
The job is canceled. Select
[End].
―