Kyocera Ecosys M6526cdn

Basic Operation
3-9
3
Adjusting Density
Use this procedure to adjust the density when copying.
Part that is operated
The procedure for adjusting the density of copies is explained below.
1 Press the Function Menu key. Function Menu
appears.
2 Press the  or  key to select [Density].
3 Press the OK key. Density appears.
4 Press the  or  key to select your desired
density.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
6 Press the Start key. Copying begins.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection g
Density: a b
4 v Lighter -1
*********************
6 y Darker +1
5 w Normal 0