Kyocera Ecosys M6526cdn Operation Guide

Default Setting (System Menu)
8-137
8
4 Press the OK key. The Service Setting menu
appears.
5 Press the  or  key to select [Drum Refresh].
6 Press the OK key. A confirmation screen appears.
7 Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Service
Setting menu.
Altitude Adj. (Altitude adjustment setting)
This sets the altitude adjustment mode. If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude Adjustment mode setting can be used to restore print quality.
Use the procedure below to set the altitude adjustment setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the  or  key to select [Service Setting].
Service Setting: a b
*********************
2 Network Status
3 Test Page
[ Exit ]
1 Service Status
Start the drum
refresh.
Are you sure?
[ Yes ] [ No ]
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[ Exit ]
= Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Backgrnd Density
[ Exit ]
1 Copy Denst. Adj.

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English