Sending Functions
5-27
5
Job Finish Notice
This feature sends an e-mail providing notification that transmission has been completed.
Use the procedure below to specify the Job Finish Notice settings.
1
Press the
Send
key.
2
Place the originals on the platen or in the
document processor.
3
Press the
Function Menu
key. Function Menu
appears.
4
Press the ļ² or ļ³ key to select [JobFinish Notice].
5
Press the
OK
key. JobFinish Notice appears.
6
Press the ļ² or ļ³ key to select [On] and then press
the
OK
key.
7
Press the ļ² or ļ³ key to select [Address Book] or
[Address Entry], and then press the
OK
key.
8
If you select [Address Book], select [Address
Book] on the next screen and press the
OK
key,
and then select the notice destination.
Press [Menu] (the
Right Select
key), select
[Detail] on the next screen and press the
OK
key to
view the details of the selected notice destination.
To Next Page
Loading...
Need help?
General
