Kyocera Ecosys M6526cdn

Copying Functions
4-4
Paper Selection
Select the paper source that contains the required paper size.
Part that is operated
NOTE: Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper
Settings on page 8-8).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
1 Press the Copy key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Paper Selection].
5 Press the OK key. Paper Selection appears.
6 Press the  or  key to select the desired paper
size.
If [Auto] is selected, the paper matching the size of
the original is selected automatically.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection g
Paper Selection: a b
*********************
2 A Letter a Plain
3 B Custom a Plain
1 * Auto