Management
11-8
11
Press the
ļ¶
or
ļ·
key to select [Login Password:],
press [Edit] (the
Right Select
key), enter the Login
Password, and then press the
OK
key.
12
Enter the same Login Password to confirm and
press the
OK
key.
13
Press the
ļ·
key to select [E-mailAddress:], press
[Edit] (the
Right Select
key), enter the e-mail
address, and then press the
OK
key.
14
Press the
ļ·
key to select [Access Level:], press
[Change] (the
Right Select
key), select the user
access privilege, and then press the
OK
key.
NOTE: If the user list is for device administrator,
[Change] is not displayed.
15
Press the
ļ·
key to select [Account Name:], press
[Change] (the
Right Select
key), select the
account, and then press the
OK
key.
NOTE: If the user list is for device administrator and
the device administrator does not log in, [Change] is
not displayed.
16
After entering the user information, press the
OK
key again.
Registered.
is displayed and the screen returns to
Local User List.
Changing User Properties
User information can be changed. It can be changed only by a user with administrator privileges.
Use the procedure below to change the user properties.
NOTE: Refer to Character Entry Method on Appendix-9 for details on entering characters.
To Next Page
Loading...
Need help?
General
