Basic Operation
3-45
3
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the
same way.
1
Activate the TWAIN compatible application.
2
Select the machine using the application and
display the TWAIN dialog box.
NOTE: For selecting the machine, see the Operation
Guide or Help for each application software.
3
Select scanning settings in the TWAIN dialog box
that opens.
For settings that appear in the TWAIN dialog box,
see Help for each application software.
4
Place the originals on the platen or in the
document processor.
5
Click the
Scan
button
The document data is scanned.
To Next Page
Loading...
Need help?
General
