Kyocera Ecosys M6526cdn Operation Guide

Appendix-6
Optional Function
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
• UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
NOTE: Restrictions such as the number of times the application can be used during the trial period differ
depending on the application.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the
OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
2 The System menu appears.
3 Press the  or  key to select [Op Function].
4 Press the OK key. The Op Function menu
appears.
5 Press the  or  key to select desired application.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Op Function: a b
*********************
2 UG-33 T
[ Menu ]
1 ID-Card g

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English