Status / Job Cancel
7-17
7
1 In the Job Log History menu, press the ļ² or ļ³ key
to select [Send History].
2 Press the
OK
key. A confirmation screen appears.
IMPORTANT:
If no destination is registered, Enter
destination is displayed. Refer to Registering
Destination on page 7-15 and register the desired
destination
3
Press [Yes] (the
Left Select
key).
Accepted.
is
displayed and the job log is sent to the registered
destination before the screen returns to the Job
Log History menu.
Setting E-mail Subject
Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
1
In the Job Log History menu, press the ļ² or ļ³ key
to select [Subject].
2
Press the
OK
key. Subject appears.
NOTE: Refer to Character Entry Method on
Appendix-9 for details on entering characters.
3
Enter the subject.
4
Press the
OK
key.
Completed
. is displayed and the
screen returns to the Job Log History menu.
To Next Page
Loading...
Need help?
General
