Kyocera Ecosys M6526cdn

Copying Functions
4-2
Original Size
Specify the size of originals being scanned. Be sure to select the original size before starting the copying
process.
Part that is operated
The following options are available.
1 Press the Copy key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Original Size].
Item How to Select Sizes
Standard
Sizes
Select from
standard sizes,
envelope,
postcard or the
custom sized
originals*.
* For instructions on how to specify the custom original size,
refer to Custom Original Size Setup on page 8-8
.
Use the procedure below to select the original size.
Letter, Legal, Statement, Executive,
Oficio II, A4, A5, A6, B5, B6, Folio,
216×340 mm, 16K, ISO B5,
Envelope #10, Envelope #9,
Envelope #6, Envelope Monarch,
Envelope DL, Envelope C5, Hagaki,
Oufuku Hagaki, Youkei 4, Youkei 2
and Custom
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection g