Sending Functions
5-5
5
Use the procedure below to select the size for transmission when sending scanned images.
1
Press the
Send
key.
2
Place the originals on the platen or in the
document processor.
3
Press the
Function Menu
key. Function Menu
appears.
4
Press the ļ² or ļ³ key to select [Sending Size].
5
Press the
OK
key. Sending Size appears.
6
Press the ļ² or ļ³ key to select the desired sending
size.
7
Press the
OK
key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8
Specify the destination, and press the
Start
key to
start sending.
To Next Page
Loading...
Need help?
General
