Kyocera Ecosys M6526cdn Operation Guide

Default Setting (System Menu)
8-77
8
Destination confirmation screen before transmission
You can specify whether or not the destination confirmation screen appears after the Start key is pressed or
after a destination is added or edited before transmission.
The table below shows the available settings.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Send].
2 Press the OK key. The Send menu appears.
3 Press the  or  key to select
[DestinationCheck].
4 Press the OK key. The destination confirmation
menu appears.
5 Press the  or  key to select [Check before
Send] or [Check New Dest.].
Item Detail
Check beforeSend Specify whether or not the destination
confirmation screen appears before
transmission.
Check New Dest. Specify whether or not the destination
confirmation screen appears when the
destination is new.
Sys. Menu/Count.: a b
7 Copy
8 Printer
*********************
[ Exit ]
9 Send
Send: a b
*********************
2 DestinationCheck
3 Default Screen
[ Exit ]
1 Select Key Set.
DestinationCheck: a b
*********************
2 Check New Dest.
[ Exit ]
1 Check beforeSend

Kyocera Ecosys M6526cdn Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Paper Capacity	250 sheets
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 kbps
Mobile Printing Support	Yes
Paper Output Capacity	150 sheets
Max Paper Size	A4
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0, Ethernet
Warm-up Time	29 seconds
Duty Cycle	50, 000 pages per month
Recommended Monthly Print Volume	Up to 3, 000 pages
First Copy Out Time	10 seconds
Zoom Range	25% - 400%
Scan to	Email, FTP, SMB, USB
Fax Resolution	300 x 300 dpi
Memory	512 MB
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal