Kyocera Ecosys M6526cdn Operation Guide

Default Setting (System Menu)
8-80
3 Press the  or  key to select [Off] or [on].
If [On] is selected and the
OK key is pressed, the
Forward Rule screen appears.
If [Off] is selected and the
OK key is pressed,
proceed to step 6.
4 Press the  or  key to select the Forward Rule.
5 Press [Select] (the Right Select key). The
selected file name is indicated by a checkmark
next to it.
If you need to add the Forward Rule, repeat steps
4 to 5 to select them.
6 Press the OK key. Completed. is displayed and the
screen returns to the Send and Forward menu.
Setting the destination
Set the destination to which the original is forwarded.
Use the procedure below to set the destination.
1 In the Send and Forward menu, press the  or 
key to select [Destination].
2 Press the OK key. The Destination menu appears.
Forward: a b
*********************
2 G Folder(SMB) T
3 H Folder(FTP) T
[ Select ]
1 p E-mail T
Send and Forward: a b
*********************
2 Destination
1 Forward
Send and Forward: a b
*********************
2 Destination
1 Forward
Destination: a b
*********************
2 Register
[ Exit ]
1 Confirmation

Kyocera Ecosys M6526cdn Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Paper Capacity	250 sheets
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 kbps
Mobile Printing Support	Yes
Paper Output Capacity	150 sheets
Max Paper Size	A4
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0, Ethernet
Warm-up Time	29 seconds
Duty Cycle	50, 000 pages per month
Recommended Monthly Print Volume	Up to 3, 000 pages
First Copy Out Time	10 seconds
Zoom Range	25% - 400%
Scan to	Email, FTP, SMB, USB
Fax Resolution	300 x 300 dpi
Memory	512 MB
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal