Default Setting (System Menu)
8-93
8
NOTE: If [On] has been selected, set the number of
days for storage as the [Period]. [Period] is only
displayed if it has been set to [On].
4
Press the
OK
key. The Period screen appears.
5
Enter the number of days for storage using the
numeric keys, the or key.
6
Press the
OK
key. The Detail menu screen
reappears.
Overwrite Set. (Setting of overwrite storage)
This setting is used to permit or prohibit the overwriting of old documents that have been stored for the storage
of new documents.
1
In the Detail menu screen, press the or key to
select [Overwrite Set.].
2
Press [Change] (the
Right Select
key). The
Overwrite Set. screen appears.
3
Press the or key to select [Permit] or
[Prohibit].
4
Press the
OK
key. The Detail menu screen
reappears.
To Next Page
Loading...
