Kyocera Ecosys M6526cdn

Default Setting (System Menu)
8-194
IPSec Setting
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off .
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
2 The System/Network menu appears.
3 Press the  or  key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the  or  key to select [IPSec].
6 Press the OK key. IPSec appears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Network Setting: a b
2 WSD-SCAN
3 WSD-PRINT
*********************
[ Exit ]
4 IPSec
IPSec: a b
*********************
2 On
1 *Off