Kyocera Ecosys M6526cdn - Page 456

Default Setting (System Menu)
8-200
4 Press the OK key. The Optional Network screen
appears.
5 Press the  or  key to select [Basic].
6 Press the OK key. The Basic menu screen
appears.
7 Press the  or  key to select [IPSec].
8 Press the OK key. The IPSec screen appears.
9 Press the  or  key to select [Off] or [On].
10 Press the OK key. Completed. is displayed and the
screen returns to the Basic menu.
NetWare Setup
Make this setting when you use NetWare. The default settings is " Off ".
Use the procedure below to setup the NetWare setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the
Right Select key).
Optional Network: a b
*********************
[ Exit ]
1 Basic
Basic: a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit ]
1 Host Name
IPSec: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]