232 General Maintenance
Fuel Filter Replacement
Fuel filter needs to be replaced periodically according to manufacturer’s specifications. If your
E
XPERT™ unit is a Mack LEU, special procedure must be followed to change the fuel filter.
To change the fuel filter of your E
XPERT™ unit with a Mack LEU chassis, do the following:
1. Free the pipe from the clamps (see illustration below).
2. Move the pipe close to the oil pan for more working space.
3. Proceed with the replacement of the fuel filter.
NOTE: Always follow your chassis manufacturer’s recommendations regarding fuel filter
replacement.
4. After installing the fuel filter, move back the pipe to its original place.
5. Slide the pipe into the clamps.
IMPORTANT: To prevent air from getting into the system, make sure the fuel filter that you install is full of fuel.
Painting and Finishing
Type of surface finishing and painting finishing recommended:
SURFACE PREPARATION
Clamps
Pipe
Fuel filter
Fuel filter