Multiplexing 373
Pump Usage
This section contains an optional hour meter that tracks pump usage for maintenance purposes.
Press “Esc” to return to the preceding page.
Time Adjust
This section allows you to set the Time and Date indicator.
Press “Esc” to return to the preceding page.
NOTE: To go back to the Main Page or Main Menu, press “Esc” as needed until the desired page is
displayed.
Warning Buzzer
Among the many buttons on the control panel you will find a warning buzzer (see Figure 9-18). This
buzzer sounds and a red light in its center flashes to warn the operator of any situation that might be
hazardous. When this happens, the operator can look at the monitor screen for more information on
the situation. A caution or warning message will be displayed. The buzzer also sounds when the truck
is in reverse or when the body and/or tailgate are being raised.
Figure 9-18
Warning buzzer
Plugging a Computer
The in-cab control panel of the EXPERT™ has a computer plug that can be used to connect a laptop
computer for reprogramming purposes (see Figure 9-19). Connecting a laptop to this plug requires
special hardware and software (included in the service kit). For more information on this, contact the
LabriePlus Service Department. In advanced troubleshooting process, a modem may be connected to
this plug to help Labrie’s technicians to detect and pinpoint the cause of body-related problems.