372 Multiplexing
9. Select the feature(s) that you want to lock using the password created or saved.
NOTE: If you have forgotten your password, please contact the LabriePlus Service Department.
Module Software Version
On the Module Software Version page, you will find the software version currently used by each of
the modules installed on the truck and by the master control module.
Figure 9-17
Software version page
With the information on this page it is possible for the operator or maintenance personnel to
determine the electrical schematic number pertaining to a specific vehicle. Looking at Figure 9-17
above you will notice the following digit string 8-8-5-1 between, for example, 10 and R1. As all Labrie
electrical schematics begin with ZS00, you simply add those digits to that base number to get the
corresponding electrical schematic number. So, in this case, the electrical schematic number is
ZS008851.
Press “Esc” to return to the preceding page.
Module 10 = 10_8851_R1
Module 11 = 11_8851_R0
Module 50 = 50_8851_R0
Module 60 = 60_8851_R0
To Next Page
Loading...
Need help?
General
