Lifting Arms 407
Figure 10-41
Wear pad B
5. Remove wear pad C (2 bolts) and replace it by a new one.
Figure 10-42
Wear pad C
IMPORTANT: As dust particles and sand stick to grease, never lubricate the HELPING-HAND™ automated arm wear
pads. If you do, this may jam the moving parts and/or cause premature wear.
6. Remove wear pad D (2 bolts) and replace it by a new one.
Figure 10-43
Wear pad D
7. Remove wear pad E (4 bolts) and replace it by a new one.
To Next Page
Loading...
Need help?
General
