LeeBoy 685D - Page 233

Item
No
Part Number Qty Description Remarks
REF 130004 1 Turntable & Drawbar Assembly Includes Items 1-27
REF 130014-1SRV 1 Drawbar Assembly Includes Items 1-20
1 857578 1 Turntable Dust Cover
2 100-6-16-12-5F 4 CSHH, 3/8-16 x .75, GR5, FT
3 300-6 7 Washer, Flat, SAE, 3/8
4 204-20-7-5 1 Nut, Lock, Stover, 1-1/4-7, GR5
5 130060-1 2 Ball Joint Bushing, Small Taper
6 140610 3 Lube Fitting, Straight, 1/4-28
REF 1019684 1 Moldboard Slide Manifold Assembly w/Adapters Includes Items 7-8
7 1019696 1 Moldboard Slide Manifold
8 FS6400-06-06-O 6 Straight Adapter, -6 ORFS/-6 O-Ring
9 100-4-20-24-5 2 CSHH, 1/4-20 x 1.50, GR5
10 300-4 4 Washer, Flat, SAE, 1/4
11 302-4 2 Washer, Lock, 1/4
12 200-4-20-5 2 Nut, Hex, 1/4-20, GR5
13 131140 8 Hose Clamp, 2 Hole - 5/8
14 220360 4 Bushing, 1.00 ID x 1.25 OD x 1.00
15 100-8-13-40-5 6 CSHH, 1/2-13 x 2.50, GR5
16 302-8 6 Washer, Lock, 1/2
17 130101 1 Drawbar Pull Ball Socket Half
18 130106 1 Drawbar Pull Ball
19 200-18-12-5 1 Nut, Hex, 1-1/8-12, GR5
20 302-18 1 Washer, Lock, 1-1/8
21 100-10-11-60-5 6 CSHH, 5/8-11 x 3.75, GR5
22 300-10 6 Washer, Flat, SAE, 5/8
23 204-10-11-5 6 Nut, Lock, Stover, 5/8-11, GR5
24 130224SRV 1 Moldboard Turntable Weldment Includes Items 3,14,25
25 1009981 2 Bushing, Moldboard Tilt
26 130083 1 Turntable Bottom Plate
27 204-6-16-5 3 Nut, Lock, Stover, 3/8-16, GR5
28 35465-06 9 Grommet
29 130103 1 Drawbar Pull Ball Shim - .025
30 130104 1 Drawbar Pull Bar Shim - .030
31 130105 2 Drawbar Pull Bar Shim - .055
Moldboard Turntable Assembly, 11 Ft/12 Ft (2 of 4)
7
Illustrated Parts List
LeeBoy 685D Motor Grader 7-25